|
Post by dancer on Aug 9, 2015 20:03:20 GMT
I have a wool/felt flat cap which has 'developed' a dent in the top & side - any ideas how to reshape it?
|
|
|
Post by kateanne0 on Aug 14, 2015 15:15:56 GMT
Reshape your hat If your hat is crushed or flattened, here are some tips to try- so don’t give up hope! This process, which involves steaming or stuffing the hat, is a really simple but effective way to get your hat looking fresh again. But always remember: never use an iron on felt, as it’ll singe the material. Stuffing Gently pop out any dents. Stuff the entire hat with tissue paper. Check the progress after a day, though it could take several days depending on the hat's style and the coarseness of the fabric. Remove the paper when the hat regains its shape. A wet felt hat If you are caught in the rain with your felt hat, turn out the sweatband to dry it and to provide a platform for the hat to slowly dry on. Gently push out the creases and dents to make the crown as rounded as possible. Never use a hair dryer as this will wrinkle and damage the hat. Once the hat is dry, gently reform the crease. Steaming a felt or wool hat/cap for more re-shaping Set a full kettle over a gas or electric range. Maintain the steam so it escapes the spout steadily but not forcefully. Position the warped area over the steam (mind your hands!!!) for up to 30 seconds or until the fabric is evenly saturated. Reshape the area with your fingers without overworking the fabric. Allow it to cool and stiffen. Note: Any felt flowers or felt embellishments can also be gently steamed and reshaped. Do not iron them! Taken From: www.google.co.uk/#q=re+shape+a+wool/felt+flat+cap?Think if you do steam the hat you should then stuff it will clean white tissue paper until the hat dry and keeps its shape - Good luck
|
|
|
Post by dancer on Aug 18, 2015 10:39:54 GMT
Thank you!
|
|