|
|
Post by ffynnoncadno on Aug 16, 2009 10:23:50 GMT
Steel frame building, I had this specially made for horses,but it has never been errected, it is 36' wide and 142' long.The steel alone cost £3,400 and to make it cost £1,500, So I am open to offers in the region of £4,750. It has been treated with red oxide and has been kept on concrete. No sensible offer refused ;D
|
|
|
|
Post by more info on Aug 16, 2009 10:44:19 GMT
any pictures or more info, is it just the frame work, is there any boarding, gates etc?
|
|
|
|
Post by showmare on Aug 16, 2009 12:18:00 GMT
Where are you. Does this bolt to the floor.
|
|
|
|
Post by ffynnoncadno on Aug 16, 2009 12:20:53 GMT
If you send me your email address to my email address ffynnoncadno@talktalk.net Then I will attach some pic's,there is only the frame work as I was going to block inside it,to create the stables.
|
|
|
|
Post by ffynnoncadno on Aug 16, 2009 12:26:40 GMT
I am in Carmarthen,Wales.The building can be bolted to the floor,and the length can be made longer by using 20' perlins instead of 15'. I have someone on my end to load the building,but will require a flat bed lorry or trailer to carry it,although I did use a hay trailer behind the tractor to pick it up  |
|
|
|
Post by ffynnoncadno on Aug 27, 2009 11:54:01 GMT
The stansions are 11' high and i'm not sure the height to the ridge but there are support stansions which are 16'. Included in the price are Z perlins and they are 16' long which would mean the overall length of the shed would be longer than 142'.This shed is just sitting here doing nothing,No reasonable offer refused.
IF YOU DON'T ASK, YOU DON'T GET !!!!!!!!! ;D
|
|
